Saturday 29 December 2012

Supercharger is a powerful Ram management script developed by an xda senior member named Zeppelinrox, and here is link to the original thread on xda. I must confess that this script is one of the best script you will ever get out there concerning ram management without killing the battery life. Before I continue let me give you a little tips on how Supercharger works. Supercharger does not increase your ram as many people would say, but rather it helps to efficiently use your ram.The android systems can run a total of six application simultaneously and every application uses up space in the ram,thereby reducing the size of the available ram. If the available ram falls below a particular level which is called the minfree value, the android systems will start killing applications which have been not been used for the longest period of time amongst the running applications, because the android system no longer have enough ram to manage it self. Now this is where the Supercharger comes into play, the supercharge goes into the android system and increases the minfree value so that before the android systems falls below the point where it doesn't have enough ram to manage it self it kills application that is opened and have not be used for the longest period of time. It simply means reduced multitasking, and increased perfomance, making the application you are running works without lags.

REQUIREMENTS :
There are certain applications you need before we do this.

1)You will need a Busybox version 1.16.2 or any higher version. If you dont have one, you can download a busy box installer here to install busy box on your device.

2) script manager pro: download link

3) v6 Supercharger-for-android . update9 rc 8.2.sh.pdf

Now here is a link to a doc file that will give you step by step guide on how to install this wonderful script on your device.
Dowoad it and you will see the step by step instructions to follow, including the download link for the required applications .Thanks to the writer of the documents file. I am only sharing it.

37 comments:

  1. v6 Supercharger-for-android . update9 rc 8.2.sh.pdf

    This file does not exist...
    Admin plz check.. Thanx

    ReplyDelete
  2. sorry man.try again,link has been fixed

    ReplyDelete
  3. when we will open a pdf file thn it shows n error... tht it is not valid...

    ReplyDelete
  4. Its working now.. Thanx very much! And yeah I likethe site... When I go to Cyber Cafe I gonna dowload any ROM.... Plz suggest me one

    ReplyDelete
  5. hey himanshu tumne pdf open kiya kya?

    ReplyDelete
  6. Nah! I installed both apps.. Then transferred the pdf file and started script manager and followed the steps.. But Its shows there is an error.. :(

    ReplyDelete
  7. Hey admin! I think there is any problem... With Busybox.. Its says NOT FOUND when I start the process :( ...

    ReplyDelete
  8. @ Himanshu Didwania uninstall any busybox you have on your device.now download busyboxy installer and install busy box.1.16.2 or higher version.make sure it is installed in bin or xbin.

    ReplyDelete
  9. @ Anonymous.follow the instruction in the document file i gave.open the sh.pdf from the script manager pro.

    ReplyDelete
  10. @admin
    I m gettin problem.... If you are here can u help me step by step

    ReplyDelete
  11. Ok.after you download those applications and busybox is installed.open your script manger.press ok.from your script manager find the supercharger.sh.pdf ,click on it it should open.now you will click on the su and boot box.click on save and run.it will detect your busybox and continue to bring some text after it finish it will ask if your home launcher is lock to memory or ram.touch the sreen to bring up keyboard.i advice to say no.after alot of text shown it will as set speed scrolling option press 1 and press enter.it will ask another question which is do you want to create build prop or use local build prop,press b which means use build prop and press enter.another question is disable awesome v6 animation,press any key,which means no and press enter.press enter again to go back to drivers console.another question is apply super minfree calculator settings,press y which means yes and press enter and wait untill it finish loading.now press enter.another question is do you want to super clean and restart now,press y which means yes.you system will hang here so wait for about 30second then pull out your battery and reboot manually.after reboot go back to script manager and select supercharge again and press run as you have done before only that this time you wont click on su and boot box.press enter button.you should now see [1-31]press 6 which is ledded/balance.after a lot of text coming up press enter to return to drivers console.you will se no 1-31.press 12 and press enter which is named oom grouping+die hard laucher.after a lot of text coming up press enter.return to divers console by pressing enter.now select 18 which is engine flush.select any ket which means yes.go back to driver console.this time select 20 which is fix emission.select any key and press entet which means yes.go back to drivers console again and this time type 21 which is nitro lag nullifer.select N to nullify and press enter.go back ro drivers console and this time type 29 which is restar your engine and you are done.reboot your device as you did before.after reboot open script manager again and from there go to your root folder and look for the data folder.inside the data folder you should see 99supercharger.sh.tap on it will open.now select the boot and su box.press save and run.wait untill it complet.now run supercharger-for-android update9.rc8.2.sh.pdf again and you will see supercharger at 100%.
    follow this guide properly cos it is much easier the previous one.

    ReplyDelete
    Replies
    1. script runs automaticaly after each reboot?

      Delete
  12. yes the script still fynction after a reboot.

    ReplyDelete
    Replies
    1. OK!! When I first did it I did some mistake and want to reset everything and start again... How can I do it.....

      Delete
  13. It says values dont match after the disable v6.... question when Ipress enter to go back to drivers console

    ReplyDelete
  14. Now I have completed it but can I know how it helps me?

    ReplyDelete
  15. Adf.ly doesn't loading. Pls give direct link

    ReplyDelete
  16. admin
    please add me on facebook
    http://www.facebook.com/Walid44443
    or yahoo
    Walid44443@yahoo.com

    i want to root my phone but there is some problems

    ReplyDelete
  17. @ Himanshu Didwania .you can fix emissions.meaning little or no force closes.you can.also flush engine to to free up.ram used.in caching the systems.try playing a game and you will see diffrence.

    ReplyDelete
  18. I can feel it... Plz add me on FB admin so that I can contact u easily.. https://www.facebook.com/hdisruler1997?ref=tn_tnmn

    ReplyDelete
  19. How can I deactivate this script later?

    ReplyDelete
  20. @anonymous.the best way is to flash a new rom.

    ReplyDelete
  21. Ok. Thank you.
    :-)

    ReplyDelete
  22. how can i see it workin properly or not

    ReplyDelete
  23. @ Akshay Shekade .To check if it is working,run supercharger script again then you will see 100% supercharged if lower then its not supercharged fully.

    ReplyDelete
  24. Hey admin
    Which Rom are you using?
    I think Supercharger script isn't compatible with xxlf5 stock rom. I`m getting problems installing it.
    I've pimped my rom with pmr alpha, now it supports everything but Supercharger isn't working.
    :'(

    ReplyDelete
  25. I did not try it on stock rom,i use a custom rom with xxlf5baseband and it worked perfectly.

    ReplyDelete
  26. hey admin.i open the v6supercharger this it says 100%supercharge ..how to exit? kill or leave in background?

    ReplyDelete
  27. @ Anonymous.just leave in background.

    ReplyDelete
  28. @ Anonymous.just leave in background.

    ReplyDelete
  29. Dude i cant install Busybox in the busybox installer.it says that "Failed to copy over busybox to /system/xbin/" is it because my pocket is rooted??

    ReplyDelete
    Replies
    1. if you have any busybox on your device delete it first then linstall.

      Delete
  30. when i run the script of v6 charger i cant type w/ my soft keyboard please help

    ReplyDelete
  31. Help me it shows 75% charged ..and showing launcher is weak,launcher is locked in memory.how to unlock it i am currently using repencis 3.5 plz help.

    ReplyDelete

Feel free to drop your comments.