RSS Feed Twitter

Monday, 22 October 2012

How to flash stock firmware XXLF5 for galaxy pocket.

10/22/2012 08:17:00 am Gaines

Download the stock firmware here in zip format XXLF5
* Extract zip (it contains *.tar.md5 file)
* Download and Extract Odin (it contains Odin application and *.pit file)
* Mobile should be in USB Debugging mode.
*Go to Download mode (switch off your mobile, then press Vol-down + Home + Power, then Vol-up to continue)
* If Lovely greed android will appear, its in download mode.
* Open Odin Application on PC
* Connect your phone to PC
* Yellow Indication will appear on Odin in first small box,
* Click on PDA and browse downloaded firmware file (*.tar.md5)
* Click on Start (it will take time to finish)
* Done Your phone will be reset, And now you have the stock S5300XXLF5
You can now flash any rom you like.

Note:Select only pda alone.leave others blank.

Posted in

106 comments:

  1. Anonymous28 December 2012 at 18:20

    where does the yellow indication appear
    and if it does not appear then what happens
    i tried ur method and indication does not appear and phone is not resetted

    ReplyDelete
    Replies
    1. Hui29 March 2013 at 07:00

      Remove your sim card before connect to ur comp it works

      Delete
  2. Gaines29 December 2012 at 08:37

    The yellow will appear in the first box com 1. If it doesn't appear make sure your phone is in download mode by pressing the power button + home button + volume down. And press the Vol up button to continue. Also make sure you are using original samsung usb. And finally make sure samsung Kies is installed on your computer . Then it should work.

    ReplyDelete
  3. 3uSs Mohamed3 January 2013 at 20:43

    "Download the stock firmware here in zip format XXLF5" Where is The Link Of XXLF5 ??

    ReplyDelete
    Replies
    1. Unknown25 April 2013 at 15:54

      http://galaxypocketpirates.blogspot.com/2013/03/install-android-236-xxlf5-on-galaxy.html

      Delete
  4. 3uSs Mohamed3 January 2013 at 23:00

    I Do All Steps And My Mobile's Touch didn't Repair :( what will i Do Admin .... If I Do Software The Mob Will Fix ??

    ReplyDelete
    Replies
    1. Gaines4 January 2013 at 09:06

      when did the problem start?is it after flashing a rom?if it starts after flashing hyperion,and you reflash back to stock rom it should work.other wise i think it not software but hardware.

      Delete
    2. 3uSs Mohamed4 January 2013 at 17:38

      How To Do Hardware And If I Do Hardware The Mob will Fix ??

      Delete
  5. Unknown4 January 2013 at 17:48

    link to the stock rom please

    ReplyDelete
    Replies
    1. 3uSs Mohamed4 January 2013 at 17:54

      where are Do U Come From ?? And what Is The Problem In Ur phone ??

      Delete
    2. 3uSs Mohamed4 January 2013 at 18:00

      What is the Problem in Your Mob Man ?? And Where Do You Come From ??

      Delete
    3. Unknown8 January 2013 at 19:07

      nothing is wrong with my phone i just want to flash stock rom to i can flash in jelly revenge

      Delete
  6. Gaines4 January 2013 at 19:52

    @ 3uSs Mohamed.Are talking to me.if me no problem on my fone.hyperion is working perfectly

    ReplyDelete
    Replies
    1. 3uSs Mohamed4 January 2013 at 23:20

      No I Didn't Talk To You I'm Talking To @foga chokor :D :D .... @Admin.How To Do Hardware to My Mob And If I Do Hardware The Mob will Fix ?? Please :( ... where is the link Of XXLF5 ??

      Delete
    2. Unknown23 January 2013 at 16:05

      we have same problem with mohamed pls help :(

      Delete
    3. Unknown23 January 2013 at 16:06

      do celphone technicians can fixed this?pls help sir pls help

      Delete
    4. Gaines23 January 2013 at 18:26

      They should be able to fix this.but before you to them,try flashing another rom,like makdroid 2.clear data and cache,then flash makdroid 2.Now it should work

      Delete
  7. Gaines4 January 2013 at 19:55

    @ Foga Chokor.the link is up there.just click on skip at the right side and you are there.

    ReplyDelete
  8. Gaines5 January 2013 at 07:54

    The link to download xxlf5 stock firmware has been added.

    ReplyDelete
  9. Gaines5 January 2013 at 08:00

    @3uSs Mohamed.If your touch dont work at all after chaging rom then you may take it to repair center.maybe samsung service center.

    ReplyDelete
  10. Unknown17 January 2013 at 14:20

    is the pit file not needed

    ReplyDelete
  11. Anonymous18 January 2013 at 16:05

    I installed the rom directly and if does not fit to screen when i reboot..? What do i do...to had to flash back to previous rom..

    ReplyDelete
  12. Unknown26 January 2013 at 09:51

    does this metHOd also WORK for other stock firwares like DDLF2

    ReplyDelete
  13. Unknown31 January 2013 at 14:16

    sir. i did everything and it worked. but my SGP keeps on restarting.,....... it wont open.

    ReplyDelete
    Replies
    1. Gaines31 January 2013 at 16:49

      Start your device without you memory card,and tell me wgat happend.

      Delete
    2. samir zero18 February 2013 at 17:01

      same problem doesnt works :(

      Delete
    3. Unknown18 March 2013 at 07:19

      my phone keep on restarting,it dont work :(

      Delete
    4. Hui25 March 2013 at 09:46

      Hey just remove your battery and boot in recovery mode and clear cache and data and it works!

      Delete
  14. Unknown31 January 2013 at 14:35

    ????

    ReplyDelete
  15. Unknown31 January 2013 at 14:37

    can i install jelly bean on my galaxy pocet

    ReplyDelete
    Replies
    1. Gaines31 January 2013 at 16:47

      you cant install ics and jelly bean on galaxy pocket

      Delete
    2. Anonymous6 November 2013 at 07:22

      can u get the cynagemod guys to work on the bugs because thats the only rom ive found that can upgrade my android version......if u know of any please let me know

      Delete
  16. Unknown31 January 2013 at 14:38

    or ics



























































    ^_____________________________________________^

    ReplyDelete
  17. Anonymous9 February 2013 at 11:20

    what would happen if i dont flash stock firmware xxLF5

    ReplyDelete
  18. Anonymous10 February 2013 at 13:58

    thanks first i done all the steps then my fone keeps restating then i removed sd card from it then i tried then it started restarting again then i got into the recovery mode and restarted (without sd card) then it opened correctly thanks for the advice
    the reason was i accidently flashed galaxy y rom in my galaxy pocket so it wasnt fitting on my screen and when its unlocked it goes blank lol...
    i thought it was goni to be like this forever
    thanks

    ReplyDelete
  19. Unknown16 February 2013 at 10:42

    Enter CS for MD5..
    Check MD5.. Do not unplug the cable..
    Please wait..
    S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
    Checking MD5 finished Sucessfully..
    Leave CS..
    All threads completed. (succeed 0 / failed 0)


    it does not restart on its own

    ReplyDelete
  20. Gaines16 February 2013 at 16:02

    @alan jay merino.make sure usb debugging is enabled.

    ReplyDelete
  21. samir zero18 February 2013 at 16:37

    i cant see yellow :S what to do i have installed kies.

    ReplyDelete
    Replies
    1. Gaines18 February 2013 at 16:46

      make sure your usb cable is intact,also make sure you are in download mode and finally reopen odin after connection

      Delete
  22. Pradeep21 February 2013 at 12:03

    admin plz provide mediafire link ,this link is very slow,thanx

    ReplyDelete
  23. Chetan2 March 2013 at 09:52

    Give me the direct download link please.
    and after instaling this rom can i get my 3GB intermal memory back?
    I mean can it reset my sgp how like it was first before instaling hyperion 8 rom?
    please send me email on
    canbhavane17@gmail.com
    i will thankfull who will help me
    please help me

    ReplyDelete
  24. Chetan2 March 2013 at 09:52

    Give me the direct download link please.
    and after instaling this rom can i get my 3GB intermal memory back?
    I mean can it reset my sgp how like it was first before instaling hyperion 8 rom?
    please send me email on
    canbhavane17@gmail.com
    i will thankfull who will help me
    please help me

    ReplyDelete
  25. Chetan2 March 2013 at 10:08

    And can i install this rom from my windows xp?

    ReplyDelete
  26. Chetan3 March 2013 at 14:49

    Is it necessary to install kies on pc?

    ReplyDelete
    Replies
    1. Gaines3 March 2013 at 18:38

      Yes,it is necessary to install kies,otherwise odin will not detect your device

      Delete
    2. Gaines3 March 2013 at 18:38

      Yes,it is necessary to install kies,otherwise odin will not detect your device

      Delete
  27. Unknown4 March 2013 at 12:33

    Cant i flash any rom without doing this?

    ReplyDelete
  28. Unknown4 March 2013 at 12:35

    Cant i flash any rom without doing this?

    ReplyDelete
  29. Anonymous8 March 2013 at 05:33

    Sir my samsung galaxy galaxy was stocked gt-s5300 samsung logo wen i power on it wat can i do?tnx

    ReplyDelete
  30. Anonymous12 March 2013 at 14:41

    That was the same senario in my galaxy pocket..can you teach us how to install jellymod in galaxy pocket.. What are the requirments?thanks in advance.

    ReplyDelete
    Replies
    1. Gaines23 March 2013 at 13:33

      flash jellmod in cwm recovery WITHOUT wiping data and cache before and after flashing

      Delete
  31. Gaines18 March 2013 at 09:46

    This comment has been removed by the author.

    ReplyDelete
  32. Unknown21 March 2013 at 16:48

    This comment has been removed by the author.

    ReplyDelete
  33. Unknown22 March 2013 at 15:57

    Added!!
    Enter CS for MD5..
    Check MD5.. Do not unplug the cable..
    Please wait..
    S5300XXLF5_S5300BTULF1_S5300XXLF5_HOME.tar.md5 is valid.
    Checking MD5 finished Sucessfully..
    Leave CS..
    Odin v.3 engine (ID:4)..
    File analysis..
    SetupConnection..
    Can't open the serial(COM) port.
    All threads completed. (succeed 0 / failed 1)

    ReplyDelete
    Replies
    1. Gaines23 March 2013 at 13:30

      make sure samsung kies service or kies is not running at all in the background of your computer

      Delete
  34. Unknown30 March 2013 at 05:01

    do my phone hard reset after doing odin?

    ReplyDelete
    Replies
    1. Gaines30 March 2013 at 12:24

      yes you will loose all installed applications

      Delete
  35. Anonymous31 March 2013 at 08:12

    anyway to remove my rom

    ReplyDelete
  36. Anonymous31 March 2013 at 09:18

    but my current is s5300xxle4

    ReplyDelete
  37. bhindakambo7 April 2013 at 09:24

    I can not see Yellow Indication will appear on
    Odin in first small box,

    ReplyDelete
    Replies
    1. Gaines27 April 2013 at 17:09

      its either you dont have samsung driver or you are not connected properly to with the usb,also make sure you are in download mode

      Delete
  38. bhindakambo7 April 2013 at 09:27

    Sir please reply me fast

    ReplyDelete
  39. 3uSs Mohamed7 April 2013 at 10:40

    I need arabic Language .. Please Admin :'( :'(

    ReplyDelete
  40. Anonymous12 April 2013 at 20:36

    Where i can get PIT,BOOT,PDA,PHONE,CSC and UMS file's?

    ReplyDelete
  41. Lucas Arantes13 April 2013 at 22:50

    PT-BR??

    ReplyDelete
  42. Unknown25 April 2013 at 07:24

    after the installation its succeed and restart, but its starting to boot loop. what can i do? please help me!
    thanks!!!

    ReplyDelete
  43. Unknown25 April 2013 at 15:59

    THANK YOU ITS WORK :D

    ReplyDelete
  44. Anonymous27 April 2013 at 06:52

    sir plz help me.. My galaxy pocket is restart repeatedly.. :(

    ReplyDelete
    Replies
    1. Gaines27 April 2013 at 17:03

      pls give more details so i will be able to help

      Delete
    2. Anonymous29 April 2013 at 18:40

      ill try to flash hydroperia.zip on my gt-s5300 ..after reboot it stock on logo and restart repeatedly .. Help sir how can i enable usb debugging mode in bootloop becaus i couldnt check the usb debbuging m0de plz help

      Delete
    3. Gaines3 May 2013 at 04:07

      You cant enable usb debugging from a bootloop.best is if you can access recovery mode,flash another rom over the previous one

      Delete
  45. Anonymous27 April 2013 at 13:59

    pliz give me the other link, coz the hotfile link cant be accessed!!!

    ReplyDelete
  46. Unknown2 May 2013 at 12:27

    how will i know if the flashing is starting?

    ReplyDelete
  47. Unknown2 May 2013 at 12:29

    I cant even go to the download mode :'( pls help

    ReplyDelete
    Replies
    1. Gaines3 May 2013 at 04:02

      Press volume down+homr button+power button together for about 5-10 sec,then you should be in download mode

      Delete
  48. Unknown2 May 2013 at 12:32

    the message box says setup connection :'(

    ReplyDelete
  49. Anonymous3 May 2013 at 01:00

    Admin will it be back to normal like the first time i buy my SGP ?

    ReplyDelete
  50. CSCC_Security6 May 2013 at 09:00

    i instal hyperion 8 and my sd card is not readable and i cant connect my phone to pc plz help me

    ReplyDelete
    Replies
    1. Gaines15 May 2013 at 11:12

      hyperion 8 does not read sd card try another rom

      Delete
  51. Anonymous15 May 2013 at 03:56

    can it b flashed like normal custyom rom thru CWM ??

    ReplyDelete
  52. Anonymous16 May 2013 at 14:06

    how about ONKEY 7s RESET??

    ReplyDelete
  53. Unknown18 May 2013 at 15:43

    Thank you men!!! Such a great help!!!
    I have researched this for about 3 hours and finally!!!!

    xD

    ReplyDelete
  54. Anonymous22 May 2013 at 02:41

    hi my sgp is bootlooping , and not detecting in odn , i have wiped case, installed kies and using original samsung usb. pls help

    ReplyDelete
  55. Unknown23 May 2013 at 04:50

    what if i dont have an original samsung usb???

    ReplyDelete
  56. Unknown23 May 2013 at 05:04

    This comment has been removed by the author.

    ReplyDelete
  57. Anonymous11 June 2013 at 15:13

    Can i install any rom without the flashing of the stock ron? I mean i want to change my rom but i dontvwant to do the XXL5 thing.. So can i ibstall other ron with out xxl5 please answer

    ReplyDelete
    Replies
    1. Anonymous1 July 2013 at 01:23

      yeah same here i am afraid of consequences to happen?? cA WE do it without the xxl5 bit please reply!

      Delete
  58. noname30 June 2013 at 22:56

    Thank you admin

    ReplyDelete
  59. Unknown20 July 2013 at 05:07

    sir i have a problem when i flash this firmware....when i using 3x4 keypad is still numbers apears on the screen not Abc

    ReplyDelete
  60. zackie28 July 2013 at 22:01

    10q !!!!!! so much dude... its workkkkkkkkkkkkkkkkkkk to me

    ReplyDelete
  61. laurice13 August 2013 at 09:29

    i cant open my phone so that i cant turn it in usb debugging mode.. what am i going to do..?

    ReplyDelete
  62. Need Help!!17 August 2013 at 16:14

    Hello,sir!
    I got problem with my SGP after I instal jellyblast rom and keep updating the rom till the latest one.Firstly ,when I format the internal memory and go to recovey mode to do hard reset,,my phone doesnt boot normally.It kee
    p restarting and the major problem were my phone doesnt detect my ex-sdcard at all .I lost hope already,,plus I cannot turn on Usb debugging. So what can I do to fix this? Please,,reply me as fast as possible Sir..Thank You!!

    ReplyDelete
  63. Unknown19 August 2013 at 14:14

    tnx bro..100% working.. tnx for the zip file.. GODbless..

    ReplyDelete
  64. Kumail Hyder26 August 2013 at 17:16

    Please give another link to download the zip file it says 30 mins wait and then download will be avlble

    ReplyDelete
  65. Unknown29 August 2013 at 13:01

    anyone have idea how to unbrick galpock? after partitioning to sd card it cant open!!!!

    ReplyDelete
  66. Mahek Ranpura3 September 2013 at 21:30

    my phone after installing silverlight the settings and the notification bar were not available so i thought of wiping the phone but after wiping its says touch the android to begin i touched but no response pls... help.. reply ASAP

    ReplyDelete
  67. Mahek Ranpura3 September 2013 at 21:34

    my phone after installing silverlight the settings and the notification bar were not available so i thought of wiping the phone but after wiping its says touch the android to begin i touched but no response pls... help.. reply ASAP

    ReplyDelete
  68. Anonymous25 September 2013 at 11:01

    i flashed repencis will my old rom be reflashed if i flash this firmware?

    ReplyDelete
  69. Unknown18 October 2013 at 07:58

    someone help me? i cannot extract the XXLF5.when i extract it someting appears it says the failed, the file is corrupt.

    ReplyDelete
  70. Anonymous11 September 2014 at 19:57

    how do i remove kernel panic aploade mode

    ReplyDelete

Feel free to drop your comments.

Subscribe to: Post Comments (Atom)
Twitter Delicious Facebook Digg Stumbleupon Favorites More

Like us Facebook

Popular Posts

  • Angry Birds Space Premium 1.4.0 APK
    Here comes another version of the award winning game, angry birds version 1.4.0.This version comes with new levels and it is also the premiu...
  • iAlexander ROM v1.2b
    Here comes the ialexander rom for galaxy pocket created and designed by ialexander of xda developers.Here is the original thread on xda deve...
  • Hydroperia Rom Version 2
    Changelogs: *Smoother Swipe To Remove *Now with Beats Audio , Alsa Mixer and Beats equalizer ALL IN ONE *Redefined Framework *Redefined...
  • Winamp Pro v1.4.7
    Play, manage and sync music from your Mac or PC to your Android device. Winamp Pro offers a complete music management solution (2.1 OS &...
  • Blackstar Rom v4 Final
    This maybe the last update for blackstar project,but anyway we can all say we enjoyed the blackstar rom from version 1.I say thank you to t...

Blogger templates

Receive all updates via Facebook. Just Click the Like Button Below...

Get This SpiceUpBlogging

Blogger news

Blogroll

Related Posts Plugin for WordPress, Blogger...