Sunday, 18 November 2012

Jelly mod is a verry nice rom for galaxy pocket,lets take a look at the rom together.
Please Read Carefully, before You Start To Flash The Rom.

FEATURES
Smoth Looking & Transparant
New animation
New Setting View
6 Lock Screen
Very Fast Peformance
Very Fast Internet
And many more

DOWNLOAD JellyMOD rv1.0
NOTE; You must DEODEX your rom before you flash the rom. If not, your Dialertab and Statbar will be gone.if you dont know how to flash you can
download DeodexDXLF2.zip
and flash it through CWM/Recovery.
note this deodex is for DXLF2 Firmware .After deodex you can flash JellyMOD Rv1.0 If you already use Custom ROM like Revencis.v3.0,v3.5 or any makdroid rom, You can directly flashJellyMOD Rv1.0 from CWM without deodexing

          INSTALLATION GUIDE

1. Copy JellyMOD Rv1.0.zip to internal memory
2. Go to recovery mode (Vol-up +
Home + Power)
3. Choose apply Update from SD card
4. Select CWM for pocket (You can use VM00CWM.zip file.
5. Install from SD card
6. Choose JellyMOD Rv1.0.zip &
install
7. Please wait... for completion....
8. Reboot the system
9. Done
BUG
Do not ever do WIPE DATA/FACTORY
RESET after installing JellyMOD Rv1.0
Dont Forget to Backup your Rom first,
to avoid something undesirable


43 comments:

  1. hey buddy i flashed the deodex file in recovery mode & installed jelly mod my status bar and dialer tab has gone...pplzz help me....

    ReplyDelete
    Replies
    1. Obviously your rom was not Deodexed properly or maybe you wipe Cache before or after flashing.if you create a backup restore then flash jelly mode again,properly. Reply when you try the above so I can further if needed.

      Delete
    2. how can i cr8 a back-up?

      Delete
  2. same thing happened to me, what should I do? I've been searching for an answer for hours now, please help me!

    ReplyDelete
  3. like i said above flash another rom or if you make a nandroid backup restore it then flash rom again following my guide properly

    ReplyDelete
  4. what version of firmware is used for? DXLF2 or XXLF5?

    ReplyDelete
  5. Sir if u get this rom from Galaxy Pocket FB Community.
    Please put credit name, like other post.
    ty.

    ReplyDelete
  6. i was flashed yhis rom bt it was not starting only showing boot animation android
    what can i do

    ReplyDelete
  7. reflash it again and make sure you follow instruction properly

    ReplyDelete
  8. if i flash makdroid then flash jelly mod will it work(galaxy pocket)

    ReplyDelete
    Replies
    1. yes it will work and there will be no problem

      Delete
    2. it keeps on loading on that android logo forever i had to restore my last rom.help...the stock rom is getting boring.is there any other cool roms apart from mak-droid i don't like mak-droid

      Delete
    3. forgot to add that i want i rom thats like jellybean os or better or something close to it.thanks

      Delete
  9. Is it has a new kernel? Can it runs Droidwall properly?

    My concern is the kernel supports iptable, so I can use firewall apps like Droidwall properly. What happen to Galaxy Pocket is that the kernel doesn't allow the firewall to blocking apps from accesing internet data.

    I've tried both Repencis and MakDroid, the firewall doesn't work on both of them.

    ReplyDelete
    Replies
    1. no new kernel in this rom.check this post galaxypocketclub.blogspot.com/2013/01/all-availaible-kernel-and-cwm-for.html?showComment=1359011721519#c7474313259792108139 you will find kernel that supports firewall.

      Delete
  10. Will it work on mak droid v3 ? And if yes then i have to use de odex or not?

    ReplyDelete
    Replies
    1. Yes it will work on makdroid 3.and no need for deodex because makdroid 3 is already deodex.

      Delete
    2. I recently tried flashing Makdroid it didn't work try downloading revencis v 3.5 then flash it the try to flash jellymod again it will work

      Delete
  11. if i flash makdroid then flash jellymod will it work in galaxy pocket

    ReplyDelete
    Replies
    1. Yes,when you want to flash jelly mod do not wipe data and cache before and after you flash jellymod.

      Delete
  12. how to restore rom?

    ReplyDelete
  13. For you to restore rom,you have to create a backup of the rom via cwm recovery.In the restore and backup option in cwm

    ReplyDelete
  14. i install jellymod v1 for my pocket but after i install it my status bar and dialer tabs are gone..ive read the 1st concern for teen ruler i made the same thing that you advice for him.. i just want to know after i made buckup files what is the next step?

    ReplyDelete
  15. @ Anonymous and others who lost dailer and staus bar as a result of flashing app,if you have a backup before restore via cwm.but if you dont have a backup before just flash another rom.i suggest makdroid v2 bcos it is very stable and it is more like stock rom.thanks.

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
  17. This comment has been removed by the author.

    ReplyDelete
  18. I have installed mak droid V3 DDLI1 firmware.can i use the JellyMOD rv1.0 on this.

    ReplyDelete
    Replies
    1. yes but make sure you do not wipe data and cache before and after flashing

      Delete
    2. http://galaxypocketclub.blogspot.com/2012/11/blue-jelly-ics-rom.html

      Delete
  19. i want to this rom & this is my 1st time to flash a rom...how to deodex it m????

    ReplyDelete
    Replies
    1. check this post to download deodex,after downloading it place in the root of sd card then flash via cwm

      Delete
  20. not working on mayh Gt-s5302 After falshing Its Just Showing The Samsung Logo Nd Nothing Else Plz Help... Or Suggest another Cyanogen Mod ics Or Jelly Bean Plz

    ReplyDelete
  21. How can I put it back to factory default? Coz there is a big problem with it. Everytime I install apps from the apps store it uses the device memory. Even it says that's its installed in the sd card. Its eating the device memory!! Can install anymore.! Plss help me.

    ReplyDelete
    Replies
    1. By the way I'm using the jellymod rv1.5.

      Delete
  22. No usb subtitle option in settings?

    ReplyDelete
  23. hello .. err. bout this one can i update everything ? like updater software ? or update games ? or update playstor?

    ReplyDelete
  24. really ? !!!! bootloop ??

    ReplyDelete
  25. Hi. please help, have never done this before. I have gingerbread,XXLJ4 android ver 2.3.6. What should i do i want to install this jelly mod????

    ReplyDelete

Feel free to drop your comments.