Pages

▼

Friday, 4 January 2013

HYPERION PROJECT 2X

Here comes the hyperion project 2x that we all have been waiting for.If you install the hyperion project 1x you will agree with me that hyperion project , is one of the best rom for our device therefore you should be expecting more from this update.Thanks to the developer for his hard and consistent work Williams villanueva.

Hyperion Project Update (01/04/2013)

CHANGELOGS:
*Statusbar like Hyperion
*Swipe to remove notification
*Settings like Hyperion(with
Complete linked shortcuts)
*Dialer activity like hyperion 6lockscreen included,
*Flashlight in statusbar already fixed
font color adopted from real
Hyperion with few modifications
due to bug color,
*Now enjoy the unlimited sending of text messaging (Remove 10 recepient limit)
*Late receiver? Dont worry
text timestamp will be honest, it
Will note when the message was sent
*Sms layout like hyperion (EXCEPT
the text box)
*Youtube app fixed,
*Fm radio now included,
*Tweaks of hyperion are included
*So run you phone like running the real hyperion.

DOWNLOAD LINK:Hyperion project 2

INSTRUCTION TO FOLLOW:
*Now to avoid problems reflash your device to stock rom from odin.If you dont know how to go about it check here
*Place hyperion poject 2 on the root of sdcard.
*Boot into clockworkmod recovery with the 3 button com(power button+volume up+home button)
*Wipe data and cache
*Select install zip from sdcard.
*Now choose the hyperion project 2 you downloaded earlier.
*After selecting it,wait untill process complete.
*Wipe data and cache again after install(very important)
*Reboot,and wait for about 3-5minutes for it to reboot.

CREDITS GOES OUT TO THE FOLLOWING:
*William villanueva(developer on the rom)
*Dev team
*Carl dean cantabay
*Reck agatap
*Gene Edward reyes
*Explodeaamir
*Synergy

Note:
Follow instruction properly you wont have problems.You can check hyperion 1 here






at

39 comments:

  1. Anonymous5 January 2013 at 08:10

    Call settings forced close !

    ReplyDelete
  2. Gaines5 January 2013 at 08:55

    That is a bug and the developer is working towards an update.

    ReplyDelete
  3. Gaines5 January 2013 at 14:39

    @ kshay Shekade just minor bug and not much,

    ReplyDelete
  4. Unknown6 January 2013 at 01:25

    best rom.....

    ReplyDelete
  5. Walid 44446 January 2013 at 10:09

    this is the best rom ?

    ReplyDelete
  6. Gaines6 January 2013 at 12:59

    no supercharger.if you want you can do that yourself.

    ReplyDelete
  7. Anonymous7 January 2013 at 13:31

    Lag in my phone..
    must wait 8+ seconds to see the boot animation..
    call settings fc
    View download in stock internet apps fc
    I hope sir william fix these bugs

    ReplyDelete
  8. Gaines7 January 2013 at 14:54

    An update will be coming soon.

    ReplyDelete
  9. Unknown7 January 2013 at 16:37

    when is coming update....?????????????

    ReplyDelete
  10. Anonymous7 January 2013 at 22:57

    I need it to support arabic language


    Other than that it's the best rom I found for the galaxy pocket

    ReplyDelete
  11. Unknown8 January 2013 at 07:35

    awesome rom.. cant wait for new update..

    ReplyDelete
  12. Unknown10 January 2013 at 02:39

    This comment has been removed by the author.

    ReplyDelete
  13. Unknown10 January 2013 at 03:04

    Hey ADMIN..
    Please Change Defalt Launcher Other than Touchwiz or Change other version of TW30 ....
    It does'nt support icon arranging .....
    it supports icon arranging according Alphabetically ... so i don't like launcher ...
    But the rom is very best i like the rom .....
    and the update....
    THANX ADMIN


    Please change TW launcher.....

    ReplyDelete
  14. Anonymous12 January 2013 at 05:07

    Heey I tried flashing into this but I keep getting tmp/sideload/package.zip (Status 2) Installation aborted. I already flashed to stock rom via Odin. I'm not sure what to do.. x.x

    ReplyDelete
  15. Gaines12 January 2013 at 16:24

    @ Anonymous.make sure you wipe data and cache before flashing.if this does not work i sugest you redownload the file.thanks

    ReplyDelete
  16. Anonymous14 January 2013 at 00:20

    cant install

    ReplyDelete
  17. Anonymous6 February 2013 at 12:20

    Do i need to flash hyperion 1x to use this

    ReplyDelete
  18. Anonymous8 February 2013 at 14:24

    guys,i clicked the link ODIN and i only downloaded the flasher is that the file?coz i will do this update for 2nd time,im a newbie and i dont know hot to do that flash..on my present update "MAK-DROID" qwerty is the only supported but i want the original keypad..is it possible to be successfull if didn't do the flash??this hyperion 2x needs a CWM too??i already have CMW that i used to "MAK-DROID",is it ok if i use that for this hyperion 2x??i am thinking for what will i do for this hyperion 2x and i am thinking to;1st go to CMW mode,wipe data then(follow the instruction)update to hyperion 2x but how will do the " latest update for hyperion2x" it says that "just flash this update to hyperion 2x"...that means that i will do the flash like how to flash to the stock setting??

    ReplyDelete
  19. Anonymous8 February 2013 at 15:34

    i didn't follow the instruction and what happen is,my phone didn't open anymore..:) stuck on the loading mode "android"..so be careful,just follow the instruction given,don't risk your phone lime..hehehe..i want to learn how to do that flash..i skip to that instruction and looked what just happened to my phone..hehe

    ReplyDelete
    Replies
    1. Gaines8 February 2013 at 18:11

      Reflashing to stock is to ensure that everthing go on fine.to reflash your phone to stock you need to have a pc and samsung kies.Now open odin and boot your phone to download mode by pressing power+middle+volume down botton simualtaneously.Now you should be in download mode ,then press volume to continue.Now connect your device to odin then you will see a yellow colour inside the first box.tick only pda box and press pda to choose the extracted firmware.it should be in md5 format.

      Delete
  20. Anonymous9 February 2013 at 11:31

    Why should i flash to stock rom

    ReplyDelete
    Replies
    1. Gaines9 February 2013 at 13:09

      you must flash stock rom before flashing hyperion 1 then flash hyperion 2,otherwise you end up in bootloop.

      Delete
  21. Anonymous9 February 2013 at 15:07

    admin, i didn't found any error on my update to 2x...those that mentioned above,i haven't encounter those yet..i want to update to 3x but when i update to 3x,my phone didn't open and all the apps just "force close" can you please post the step by step on how to flash???when i'm going to recovery,its not the CWM recovery...the font of CWM recovery is "blue" right?and the stock recovery the font is "red" and something "orange"??if im not mistaken...what i have done is..turn my phone off,press the "up+home+power" key and what appears is the stock recovery so,i have to update to CWM recovery..CWM recovery is all the same?then next step is "apply update from sd" then i choose the "update3x" i wipe data/cache before and after i install the "update3x" then reboot..is that the right step?

    ReplyDelete
    Replies
    1. Gaines11 February 2013 at 10:28

      you dont need to wipe cache and data to install update3.select install zip from sdcard and choose zip from sdcard then flash direct.

      Delete
  22. Anonymous10 February 2013 at 02:02

    my phone is on stock rom since it was bought, so why do i need to flash stock rom again.

    ReplyDelete
    Replies
    1. Gaines10 February 2013 at 15:36

      Then skip that step.that step is only for those who are on custom rom.

      Delete
  23. Anonymous10 February 2013 at 10:44

    does it need xxlf5 firmware

    ReplyDelete
  24. Anonymous11 February 2013 at 09:58

    Do I need to flash hyperion 1 before I flash this hyperion 2

    ReplyDelete
  25. Anonymous18 February 2013 at 07:41

    custom icons

    ReplyDelete
  26. Anonymous19 February 2013 at 10:48

    Can I flash this rom directly on stock rom?

    ReplyDelete
  27. Gaines20 February 2013 at 13:57

    Yes,but to be safer you can restore to stock before trying.

    ReplyDelete
  28. saepul10 March 2013 at 19:09

    arabic rtl support? coz i need this

    ReplyDelete
  29. Anonymous9 April 2013 at 00:47

    Is it working on XXLJ4?

    Then, to be sure, do i really dont need to flash 1x before flashing this?

    Thanks.

    ReplyDelete
  30. Anonymous23 July 2013 at 06:32

    admin my sim card and sd card cnt be read by gt s 5302 after been updated what should i have to do???????
    reply asap

    ReplyDelete
  31. Anonymous23 July 2013 at 06:34

    same error is shown i e sideload status 7
    when i reboot my phone it is been updated but not showing the sd card and sim??????

    ReplyDelete
  32. Unknown16 October 2013 at 17:42

    can i use chainfire 3d in this rom

    ReplyDelete
  33. Anonymous21 October 2013 at 08:12

    can i flash this rom directly from stock rom?

    ReplyDelete

Feel free to drop your comments.